Tripp Lite 3000W Compact Pure Sine Wave Power Inverter, 2 GFCI Outlets, 1 USB + 1 USB-C Charging Ports, Remote Control via RJ12 Telephone Cable, 2-Year Warranty (PINV3000SWL-120)

INDUSTRIAL-GRADE INVERTER CHARGES AND POWERS MULTIPLE ELECTRONIC DEVICES IN YOUR VEHICLE: You don't have to be near an AC power source to keep your mobile devices fully charged and your power tools and small appliances operating. This 3000W mobile inverter converts 12V DC power from your car, utility truck, fleet vehicle, boat or RV's battery into pure sine wave 110V AC power. Just connect the included battery cables between the PINV3000SWL-120's DC input terminals and the positive and negative terminals on your vehicle's battery. An LCD displays capacity, voltage, frequency, current and fault information. GFCI-PROTECTED AC OUTLETS AND HARDWIRE TERMINALS PROVIDE PORTABLE POWER FOR YOUR MOBILE APPLICATIONS: This heavy-duty power inverter provides a modified sine wave for use at remote locations, such as campgrounds, construction sites and mobile offices. Two NEMA 5-15/20R outlets, as well as hardwire output terminals, deliver a continuous output of 3000W and a peak surge output of 6000W. That's plenty to operate a variety of appliances and power tools, such as low-power lights, telemetry equipment, smart battery rechargers for small battery-operated power tools, and mobile office equipment. Both outlets feature OSHA-compliant GFCI (Ground Fault Circuit Interrupter) protection to shield you from electrical hazards due to excessive fault current. USB CHARGING PORTS KEEP YOUR DEVICES AT FULL STRENGTH: A 5V USB-A port outputs DC power up to 2.1A. A USB-C port outputs 5V/9V/12V fast-charging up to 18W maximum. Both USB ports remain active when the inverter's on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop or GPS unit without draining too much power from the vehicle's battery. INCLUDES THE LATEST SAFETY FEATURES TO PROTECT YOUR EQUIPMENT AND BATTERY: The on/off switch offers one-touch control over all AC outlets. If the power input from the vehicle's battery drops below 10V or exceeds 16V, the PINV3000SWL-120 will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature-controlled fan system begin cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively low voltage or fault conditions. REMOTE CONTROL MODULE ALLOWS POWER CONTROL FROM 20 FT. AWAY: The included PINVSWRM remote control module with 20-foot (6-meter) cable connects to the telephone-style RJ12 jack on the inverter's front panel. The module lets you mount the inverter out of sight, such as below your truck cab's jump seat or inside the glove compartment, and operate it from your vehicle's dashboard. The green LED confirms the inverter is powered on and operating correctly. BRACKETS INCLUDED FOR PERMANENT MOUNTING: The industrial power inverter's aluminum housing withstands the rigors of worksites, construction sites, business trips and family vacations. Use the built-in mounting brackets and included hardware to permanently install the inverter in a horizontal position.

• PURE SINE WAVE POWER INVERETER: 3000W mobile inverter converts 12V DC power from your vehicle's battery into pure sine wave 110V AC power. Simply connect the included battery cables between the power inverter's DC input terminals and the positive and negative terminals on your vehicle’s battery to receive power.
• TWO GFCI OUTLETS & 2 PORT CHARGING: 2 NEMA 5-15/20R outlets, as well as hardwire output terminals, deliver a continuous output of 3000W and a peak surge output of 6000W. Both outlets feature OSHA-compliant GFCI (Ground Fault Circuit Interrupter) protection to shield you from electrical hazards due to excessive fault current. 5V USB-A port outputs DC power up to 2.1A. A USB-C port outputs 5V/9V/12V fast-charging up to 18W maximum. Both USB ports remain active when the inverter’s on/off switch is set to Off.
• PREMIUM SAFETY FEATURES: On/off switch offers one-touch control over all AC outlets. If the power input from the vehicle’s battery drops below 10V or exceeds 16V, this device will automatically shut down. Green and red LEDs indicate normal and improper operation. The temperature-controlled fan system begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high/low voltage or fault conditions.
• REMOTE CONTROL FROM 20 FEET AWAY: Included PINVSWRM remote control module with 20-foot (6-meter) cable connects to the telephone-style RJ12 jack on the inverter’s front panel. The module lets you mount the inverter out of sight, such as below your truck cab’s jump seat or inside the glove compartment, and operate it from your vehicle’s dashboard. The green LED confirms the inverter is powered on and operating correctly.
• RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Limited Manufacturer's Warranty and is supported by Eaton's Chicago-based expert technical support team over phone, web and email.